Maintenance - Miele SKCE0 Operating Instructions Manual

Park system for storage (Fig. 17)

Always disconnect the vacuum
cleaner from the power supply when
you have finished using it. Remove
the plug from the socket.
 Stand the vacuum cleaner upright.
It is a good idea to retract the tele-
scopic suction wand fully.
 Slot the floorhead downwards into
one of the parking attachments on ei-
ther side of the vacuum cleaner (the
parking attachments cannot be used
with Electrobrushes SEB 228 and
SEB 236).
This makes the vacuum cleaner easier
to carry or store.

For safety reasons, do not lift the
vacuum cleaner using the dust con-
tainer carrying handle.

Maintenance


Always switch off the vacuum
cleaner for maintenance work and
unplug the power cord from the wall
socket.
Emptying the dust
container (Figs. 18 - 23)
 Empty the dust container before the
dust has reached the max marking
on the dust container.
 Pull the dust container handle up-
ward.
 Remove the dust container upward.
The contents of the dust container can
be disposed of with the normal house-
hold trash, providing it contains gen-
eral household dust only.
 Hold the dust container close to the
bin so that as little dust billows out as
possible.
 Press the yellow release button on
the bottom of the dust container.
The flap will open and the dust will fall
out.
 Close the flap so that it clicks audibly.
 Insert the dust container down into
the vacuum cleaner so that it audibly
clicks into place.
 Push the handle down.
Cleaning the dust container
Clean the dust container as required.
 Clean the dust container using water
and liquid dish soap.
 Dry the dust container carefully.
Cleaning the filter
frame (Figs. 24 + 25)
A removable filter frame is located in the
dust container. This should be cleaned
if it is obviously dirty.
 Place the emptied and open dust
container on its front.
 Release the filter frame and remove it.
 Empty the filter frame and rinse it un-
der cold running water.
en-US
17