JVC LT-32DP9BJ Instructions Manual page 40

Problem
Is the TV connected correctly to the aerial?

Change the direction of the indoor aerial.

Check digital channels signal with "Signal

Check". (P. 34)
"Missing or weak
If you still cannot watch the digital channels

signal"
after following the steps above, there may
be a problem with your aerial or its cable. Or,
the signal may be too weak.
Consult your retailer.
Æ
"Services have
changed. Do you Update the PR List

want to Update PR "Update Scan" (P. 32)
Æ
list?"
While watching TV, the message appears

"The timer will start
when a timer programme is about to start,
soon"
indicating that the channel will be switched.
Some digital channels cannot be watched on

No picture, no sound
this TV. (P. 40)
When the clock is
Change the "Time Zone" setting. (P. 29)

off time
Getting started
Actions
Basics
Problem
Album / Title / Artist
/ Year does not
Make sure to use ID3v1 tag.

display or display
correctly (Music)
Duration time cannot be calculated for MP3

that contains the artwork.
The duration time is calculated from the bit

Duration time does
rate and the file size, the time displayed may
not display or display
differ from the actual playback time. Higher
correctly (Music)
the compression rate and lower the bit rate
/ sample rate is these error margins will be
greater.
If "Auto
Demonstration"
Set "Auto Demonstration" to "Off". (P. 34)

starts when
watching TV
This is not a malfunction
When the TV is turned on, it will take approx. 18 seconds to properly

produce picture and sound.
When the TV is turned on by plugging to the AC outlet, it will take

approx. 15 seconds until the TV is ready to receive any commands
from the remote.
Advanced
Actions

Etc.