Samsung ML-331 series User Manual page 93

1
Enter lpr <file_name> from the Linux shell command line and press Enter. The LPR GUI window appears.
When you type only lpr and press Enter, the Select file(s) to
print window appears first. Just select any files you want to
print and click Open.
2
In the LPR GUI window, select your machine from the list, and
change the print job properties.
3
Click OK to start printing.
16
Configuring Printer Properties
Using the Printer Properties window provided by the Printers
configuration, you can change the various properties for your
machine as a printer.
1
Open the Unified Driver Configurator.
If necessary, switch to Printers configuration.
2
Select your machine on the available printers list and click
Properties.
3
The Printer Properties window appears.
The following five tabs display at the top of the window:
• General: Allows you to change the printer location and
name. The name entered in this tab displays on the printer
list in Printers configuration.
• Connection: Allows you to view or select another port. If
you change the machine port from USB to parallel or vice
versa while in use, you must re-configure the machine port
in this tab.
• Driver: Allows you to view or select another machine
driver. By clicking Options, you can set the default device
options.
• Jobs: Shows the list of print jobs. Click Cancel job to cancel
the selected job and select the Show completed jobs
check box to see previous jobs on the job list.
• Classes: Shows the class that your machine is in. Click Add
to Class to add your machine to a specific class or click
Remove from Class to remove the machine from the
selected class.
4
Click OK to apply the changes and close the Printer
Properties window.
4. Special features 84