Connection Manager - Nokia E52 User Manual

Filter WLAN networks
•
of found networks. The selected networks are filtered
out the next time the application searches for WLANs.
Start web browsing
•
the access point of the WLAN.
Cont.web browsing
•
the currently active WLAN connection.
Disconnect WLAN
•
to the WLAN.
Details — View the details of the WLAN.
•
Important: Always enable one of the available
encryption methods to increase the security of your
wireless LAN connection. Using encryption reduces the risk
of unauthorised access to your data.
Use the WLAN wizard in the home screen
In the home screen, the WLAN wizard shows the status of
your WLAN connections and network searches. To view the
available options, select the row showing the status.
Depending on the status, you can start the web browser
using a WLAN connection, connect to your net call service,
disconnect from a WLAN, search for WLANs, or set the
network scanning on or off.
If WLAN scanning is turned off, and you are not connected
to any WLAN, WLAN scanning off
screen. To turn WLAN scanning on and search for available
WLANs, select the row showing the status.
To start a search for available WLANs, select the row
showing the status and
To turn WLAN scanning off, select the row showing the
status and Switch WLAN scan
84
— Filter out WLANs in the list
— Start browsing the web using
— Continue web browsing using
— Disconnect the active connection
is displayed in the home
Search for WLAN.
off.
When Start web browsing
WLAN wizard automatically creates an access point for the
selected WLAN. The access point can also be used with
other applications requiring WLAN connection.
If you select a secured WLAN, you are asked to enter the
relevant passcodes. To connect to a hidden network, you
must enter the correct service set identifier (SSID).
To use the found WLAN for a net call connection, select the
row showing the status,
service, and the WLAN to be used.

Connection manager

Select Menu Ctrl. panel
>
mgr..
View and end active
connections
To see the open data connections, select
connections.
To view detailed information about network connections,
select a connection from the list and
The type of information shown depends on the connection
type.
To end the selected network connection, select
Disconnect.
To end all active network connections simultaneously,
select Options Disconnect
>
or Use for is selected, the
Use for, the desired net call
Connectivity Conn.
> >
Active data
Options > Details.
Options
all.
>