Application Settings - Nokia E52 User Manual

Edit SIP profiles
Select Menu Ctrl. panel
>
SIP settings.
Select Options Edit and from the following:
>
Profile name — Enter a name for the SIP profile.
•
Service profile — Select
•
Default destination
•
for the internet connection.
Default access point
•
for the internet connection.
Public user name — Enter your user name provided
•
by your service provider.
Use compression — Select if compression is used.
•
Registration — Select the registration mode.
•
Use security — Select if security negotiation is used.
•
Proxy server — Enter the proxy server settings for this
•
SIP profile.
Registrar server — Enter the registration server
•
settings for this SIP profile.
Configuration settings
Select Menu Ctrl. panel
>
Configurations.
You can receive messages from your service provider or
company information management containing
configuration settings for trusted servers. These settings
are automatically saved in Configurations. You may
receive configuration settings for access points,
multimedia, or e-mail services, and instant messaging (IM)
or synchronisation settings from trusted servers.
Settings and Connection
>
IETF or Nokia 3GPP.
— Select the destination to use
— Select the access point to use
Settings and Connection
>
To delete configurations for a trusted server, select
Options > Delete. The configuration settings for other
applications provided by this server are also deleted.
>
Restrict packet data
Select Menu Ctrl. panel
>
APN control.
With the access point control service, you can restrict
packet data connections from your device to certain access
points only. Your SIM card may not support the access
point control service. For more information, contact your
service provider.
To restrict packet data connections from your device,
select Options Activate
>
PIN2 code to activate and deactivate access point control
or to edit the packet data access points on the control list.
To add access points that can be used for packet data
connections to the control list, select
name manually. To enable connections to an operator-
provided access point, create an empty access point.
To remove access points from the list, select
Remove.
>

Application settings

Select Menu Ctrl. panel
>
Applications.
Select an application from the list to adjust its settings.
Settings and Connection
>
restrictions. You need your
Options Add
>
Options
Settings and
>
>
>
103