Media Input - Peavey PVi 8500 Operating Manual

Media Input

XLR BALANCED INPUT
10
Channel 8 is designed specifically for pre-recorded
(program) music, but can also be used with a
microphone. This XLR input provides a balanced low
impedance connection.
MIC OR MEDIA SELECT BUTTON
11
MEDIA INPUT
12a
These inputs, both RCA and 1/8" accept a stereo input
12b
other similar device.
®
FLS
frequency that is closest to the frequency that is feeding
back will illuminate over the slider to be adjusted. Slowly
bring the corresponding slider down until feedback is
after the feedback is gone.
GRAPHIC EQ
14
These EQs are used to make minor adjustments to the
overall mix and should be used sparingly.
AMP LEVEL LED LADDER
15
Peavey's award winning speaker protection circuit is built
into the PV
maximize the power amplifier without fear of distortion.
POWER AMP INPUT SELECT
This control allows the user to select whether the 2nd
16
power amplifier receives its signal from the Master
This allows the user to run both power amps for mains,
or use power amp 1 for mains and power amp 2 for
monitors.
MONITOR VOLUME
The master level control adjusts the level of the signal
coming out the Monitor send 1/4" jack. It can also be
assigned to feed the 2nd power amplifier via selector
switch (16).
MASTER VOLUME
18
The master level control for the main mix and the overall
volume of the powered mixer.
MAIN EQ ASSIGN
This switch allows the user the ability to assign the
graphic EQ (14) to either the Main or Monitor mix.
PVi8500.indd 22
™
speaker protection circuit.
®
8500/PVi 8500 and activated automatically to
10
15
16
22
11
12a 12b
14
15
18
2013-1-31 10:42:20