Input Specifications; Input Levels; Output Specifications - Peavey XR 8300 Operating Manual

Input Specifications

Input Z
Function (ohms)
Min
Lo-Z Mic 2k
(150 ohms)
Line Input 22k
Tape 20k
0dBU = 0.775V (RMS)
** Minimum input level (sensitivity) is the smallest signal that will produce nominal output (4dBu)with channel and master controls set for
maximum gain.
* Nominal settings are defined as all controls set at 0dB (or 50% rotation for rotary pots).

Output Specifications

Function minimum Load Z
Main
Monitor
Tape
+4dBu = 1.23V (RMS)
Gain:
Mic Input to Main Output
Line Input to Main Output
Frequency Response:
Mic Input to Main Output
Line Input to Main Output
To Power Amplifier Output
Total Harmonic Distortion:
<0.01% 20Hz-20kHz Mic Input to Main/Monitor Output at Nominal Level (20Hz-80kHz BW)
<0.01% 20Hz-20kHz Line Input to Main/Monitor Output at Nominal Level (20Hz-80kHz BW)
<0.005% Typical @ 1kHz
Graphic Equalizer:
Filter Frequencies
Maximum Boost and Cut
XR 8300 & XR
®
Input Gain
Control
Settings Min**
Max w/o -59dBu
pad (50dB) -34dBu
Max w/pad
(25dB)
Max w/o -27dBu
pad (30dB) -2dBu
Max w/pad
(25dB)
Max Gain -26dBu
(30dB)
Nominal
(ohms)
600 +4dBu
600 +4dBu
10k -10dBu
Features and specifications subject to change without notice.
8600 Specifications
®

Input Levels

Nominal* Max
-29dBu -11dBu
-4dBu +14dBu
+2dBu +21dBu
+27dBu +26dBu
+4dBu +21dBu
Max
+21dBu
+21dBu
+10dBu
60dB (Max Gain)
30dB (Max Gain)
20Hz-20kHz +0dB/-1dB
20Hz-20kHz +0dB/-1dB
40Hz-20kHz +0dB/-1dB
80, 250, 500, 1k, 2k, 4k, 10k
+12dB Boost, -12dB Cut
1
Bal
Connector
Unbal
Bal XLR Pin 1 Gnd
Pin 2 (+)
Pin 3 (-)
Bal 1/4" TRS;
Tip (+)
Ring (-)
Sleeve Gnd
Unbal RCA jacks
Bal Connector
Unbal
Unbal 1/4" Phono Tip (+)
Sleeve Ground
Unbal 1/4" Tip (+)
Sleeve Ground
Unbal RCA