Redundant Power Supply Module - Asus RS700A-E9-RS12 User Manual

2.8.2

Redundant power supply module

To replace a failed redundant power supply module:
1. Lift up the power supply module lever.
2. Hold the power supply module lever
and press the PSU latch, then pull the
power supply module out of the system
chassis.
3. Prepare the replacement power supply
module.
4. Insert the replacement power supply
module into the chassis then push it
inwards until the latch locks into place.
ASUS RS700A-E9 Series
Module lever
Module lever PSU latch
2-37