Asus RS700A-E9-RS12 User Manual page 41

5. Place the SATA/SAS/NVMe storage
device into the storage device tray then
secure it with four screws.
6. Insert the storage device tray and
storage device assembly all the way into
the depth of the bay until just a small
fraction of the tray edge protrudes.
When installed, the SATA/SAS/NVMe connector on the storage device connects to the
SATA/SAS/NVMe interface on the backplane.
7. Push the tray lever until it clicks and
secures the storage device tray in
place.
The storage device tray is correctly
placed when its front edge aligns with
the bay edge.
8. Repeat steps 1 to 7 to install the other
SATA/SAS/NVMe storage devices.
ASUS RS700A-E9 Series
2-15