Table of Contents
Advertisement
WriteProtect BAY - Left angled view
WriteProtect BAY – Back view
2.1 Connecting the WriteProtect BAY to a forensic workstation
To mount the WriteProtect BAY to a 5.25" bay on a forensic workstation, please reference the
workstation's user's manual or the case manufacturer's manual.
It is recommended the workstation be powered off when mounting and
connecting the WriteProtect BAY.
The WriteProtect BAY is powered by a 6-pin PCIe power connector. It comes with dual 4-pin
molex to 6-pin PCIe Y adapter for power supplies that do not have a 6-pin PCIe power output.
Attach a 6-pin PCIe power connector from the power supply or use the adapter to utilize two 4-
pin molex connectors. This will provide power to the WriteProtect BAY.
Connect the USB 3.0 host cable to an available USB port.
The WriteProtect BAY is now ready to be used and will turn on when the computer is turned on.
WriteProtect BAY
Logicube
User's Manual
GETTING STARTED
5
Advertisement
Table of Contents
Need help?
Do you have a question about the WriteProtect BAY and is the answer not in the manual?
Questions and answers