Sound Setup - Alpine X209D Quick Reference Manual

*1 You can make this setting in the Sound Setup screen of the Shortcut
Setup. For details, see "Sound Setup Function" (page 20).
*2 You can also make the setting in the Bal./Fad. screen.
For details on how to adjust, see "Setting the Balance/Fader/Rear
Speaker/Subwoofer" (page 34).
*3 This setting is only available when "Subwoofer" is set to "On" (
*4 When the Defeat setting is "On, " you cannot perform the set up.
*5 When "BASS ENGINE SQ" is selected in the Shortcut Setup, this
setting is disabled.
*6 Not displayed when Apple CarPlay is used/Android smartphone which
installed Android Auto App is connected.
*7 "Video" can be selected while a video is playing.
*8 The camera names are not displayed when Camera Select (page 47) is
set to "Off. "
The following steps 1 to 3 are common to each "Setting
item" of General Setup. See each section for details.
1
Select the desired item.
2
To switch the setting, touch [ ], [ ], [ ], [ ], or mark the
checkboxes "Off" ( ) or "On" (
• If " " appears, there is a further hierarchy. Touch the desired
item.
3
Touch [ ] to return to the main source screen.
• To return to the previous List screen, touch [ ] or [ ] in the
previous page. For details, see "About Basic Operation for List
Screen" (page 19).

Sound Setup

[Sound] is selected on the General Setup Menu screen in step 1. See
"General Setup" (page 33).
You can set up items related to the sound quality.
• X209D is designed exclusively for a certain car model. The Initial
setting for sound setup items may differ from the description of Owner's
Manual.
Setting the Balance/Fader/Rear Speaker/
Subwoofer
Set Balance/Fader/Rear Speaker/Subwoofer/Subwoofer Level/
Subwoofer Phase in the Bal./Fad. screen.
Setting item:
1 1
Balance* / Fader* / Rear Speaker / Subwoofer*
1
Subwoofer Phase*
*1 When selecting either of the above setting items, the Bal./Fad. screen is
displayed.
*2 When "BASS ENGINE SQ" is selected in the Shortcut Setup, this setting
is disabled.
34
-EN
).
Setting the Balance/Fader
Touch the desired point within the image area. Or touch [
).
[
Balance:
Fader:
• To reset to the initial setting (Balance: 0, Fader: 0), touch [Center].
Rear Speaker Setting
You can set the rear speaker output to "Off. "
Setting item:
Setting contents:
Turning Subwoofer ON/OFF
If an optional subwoofer is connected to the unit, make the following
setting.
Setting item:
Setting contents:
Adjusting the Subwoofer Level
You can set the Subwoofer level when a Subwoofer is connected.
Setting item:
Setting contents:
• This setting is only available when "Subwoofer" is set to "On" (
Setting the Subwoofer Phase
The subwoofer output phase is toggled Subwoofer Normal (0°) or
Subwoofer Reverse (180°).
Setting item:
2 1, 2
/ Subwoofer Level* /
Setting contents:
• This setting is only available when "Subwoofer" is set to "On" (
Fad./Bal. screen
Enables you to change to each setting screen.
Balance/Fader Image area
] [ ] [ ].
L15 to R15
F15 to R15
Rear Speaker
On (Initial setting) / Off
Subwoofer
On / Off (Initial setting)
Subwoofer Level
0 to 15 (Initial setting: 0)
Subwoofer Phase
0° (Initial setting) / 180°
]
).
).