LGC wireless InterReach Fusion SingleStar Installation And Operation Manual page 152

1. "Manufacturer's rated output power" refers to Fusion's downlink P1dB. The power per carrier tables take into account this
power reduction for multiple carriers.
B-2 InterReach Fusion SS Installation, Operation, and Reference Manual
CONFIDENTIAL
800 iDEN Products
• Safety: UL 60950, 3rd Edition
• EMC: FCC part 15 class A
• Radio: FCC part 90
1900 PCS Products
• Safety: UL 60950 3rd Edition
• EMC: FCC part 15 class A
• Radio: FCC part 24
2100 UMTS Products
• Safety: CB scheme evaluation to IEC 950, 3rd Edition with all national deviations
• EMC: ETSI TS 125 113 125 113: V4.3.0 (2002-09)
• Radio: ETSI TS 125 143 125 143: V5.2.0 (2002-09)
NOTE: for Canadian customers, the Manufacturer's rated output power
this equipment is for single carrier operation. For situations when multiple
carrier signals are present, the rating would have to be reduced by 3.5 dB,
especially where the output signal is re-radiated and can cause interference
to adjacent band users. This power reduction is to be by means of input
power or gain reduction and not by an attenuator at the output of the device.
NOTE: This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harm-
ful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
1
of
D-620605-0-20 Rev A