LGC wireless InterReach Fusion SingleStar Installation And Operation Manual page 144

Troubleshooting
Fusion
During Hub
Normal Status
Operation LEDs
At Any STATUS
Time
STATUS
POWER
8-20 InterReach Fusion SS Installation, Operation, and Reference Manual
CONFIDENTIAL
Troubleshooting Using the Fusion SingleStar Hub Status LEDs During
Table 8-9
Normal Operation
State Action
Red Use AdminBrowser to determine the
exact cause of the fault.
Power cycle one time. If the fault
remains, replace the Hub.
Use AdminBrowser to check if the
Hub is commanded Out-of-Service
(every Hub port
an RAU connected to the port, will
be red as well).
A power cycle will not clear a com-
manded Out-of-Service, you must
use AdminBrowser to clear this
state.
Alternating Reduce input signal power; reduce
Red/Green system gain.
Red Replace the Hub.
Impact
Internal Hub fault.
Main Hub and all downstream units are
off-line.
LED, that has
RAU
Signal compression.
One or more power supplies are
out-of-specification.
D-620605-0-20 Rev A