Ipod Operations - JVC KD-G425S Instructions Manual

iPod operations

This unit is ready for operating an Apple iPod
from the control panel.
Before operating, connect the Interface adapter
for iPod, KS-PD100 (separately purchased) to
the CD changer jack on the rear of this unit.
• For details, refer also to the manual supplied
with the interface adapter.
Caution:
Make sure to turn off this unit or turn off the
vehicle's ignition switch before connecting
or disconnecting the iPod.
Preparations:
Make sure "CHANGER" is selected for the
external input setting, see page 12.
~
Ÿ
Playback starts automatically from where
it has been paused previously.
!
Adjust the volume.
⁄
Adjust the sound as you want. (See
pages 10 and 11.)
• Make sure the equalizer on the iPod is
deactivated.
To pause playback
To resume
playback, press it
again.
To fast-forward or
reverse the track
To go to the next
or previous tracks
Selecting a track from the menu
1
Enter the main menu.
Now the 5/∞/4
work as the menu selecting buttons*.
* The menu selecting mode will be canceled:
– If no operations are done for about
5 seconds.
– When you confirm the selection of a
track.
2
Select the desired menu.
PLAYLIST Ô ARTISTS Ô ALBUMS Ô SONGS
Ô GENRES Ô COMPOSER Ô (back to the
beginning)
3
Confirm the selection.
To move back to the previous
menu, press 5.
• If a track is selected, playback starts
automatically.
/¢ buttons
To be continued...
13