Mounting Accessories - Technotherm CDE 18–27 VarioSelect Installation And Technical Manual

Instant water heater
Table of Contents

Advertisement

TECHNOTHERM
5. Installation

Mounting accessories

For installations under difficult condi-
tions, these mounting accessories are
available:
Mountik kit RDX
The instant water heater can be instal-
led by means of this mounting kit in
the below situations. The power supply
cable is coming out of the wall at any
place from behind the unit, but the
wall has unusual surface conditions,
making it difficult for installing the
water heater. The power supply cable is
coming from elsewhere and has to be
connected to the back of the unit.
Extension kit VDX
RDX is necessary!
The instant water heater can be instal-
led by means of this extension kit if the
water pipes are coming displaced or
exchanged out of the wall or if they are
coming edge-wise on the wall to the
unit. The power supply could come out
of the wall at any place under the unit
or the wiring could be installed
surface-mounted.
Extension kit UDX
RDX is necessary!
The instant water heater can be instal-
led by means of this extension kit if the
water-connections are expiring above
the unit. The power supply could come
out of the wall at any place under the
unit or the wiring could be installed
surface-mounted.
7

Advertisement

Table of Contents
loading

Table of Contents