Usage - Technotherm CDE 18–27 VarioSelect Installation And Technical Manual

Three colored LEDs
55 °C
48 °C
42 °C
38 °C
35 °C
electronic
electronic
55 °C
48 °C
42 °C
38 °C
35 °C
electronic
electronic

12. Usage

Set the temperature
By pressing the temperature selection button, the flow temperature is changed to
the respective next stage. The substance may have the following five temperature
levels: 35 ° C - 38 ° C - 42 ° C - 48 ° C - 55 ° C.
The LEDs indicate which target temperature is set:
• If only one LED flashes, then the temperature value is set next to the light.
• If two LEDs are lit, then the temperature value is between the illuminating LEDs
set. After 55 ° C when a new key is pressed the set temperature is again 35 ° C.
Of course it is also possible to determine the outlet temperature by mixing at the
valve of cold water with hot water (55 ° C) from the water heater.
55 °C
48 °C
42 °C
38 °C
35 °C
electronic
electronic
55 °C
48 °C
42 °C
38 °C
35 °C
electronic
electronic
16
55 °C
48 °C
42 °C
38 °C
35 °C
electronic
electronic
55 °C
48 °C
42 °C
38 °C
35 °C
electronic
electronic