Using The Pocket Pc As A Usb Host Device - Fujitsu Siemens Computers Packet LOOX T810 Easy Manual

Using the Pocket PC as a USB Host device

You can connect USB devices from Fujitsu Siemens Computers (e.g. MEMORYBIRD or
i
STORAGEBIRD) immediately.
If you want to connect other USB devices, ask your dealer whether you will need to install
corresponding drivers first.
The current consumption of the USB device must not exceed 100 mA (at +5 V). USB
devices with a current consumption of more than 100 mA must be supplied with power via
their own power supply.
► Select Start – Settings – System – USB Mode.
The window for selecting the USB mode pops up.
► Select the USB Host option.
► Confirm with OK.
► Connect the USB host cable to the mini USB port on the Pocket PC.
► Connect the USB device (such as a MEMORYBIRD) to the USB port of the USB Host cable.
The USB device is now connected to your Pocket PC.
► If the battery charge level of your Pocket PC is low, you should connect the mains adapter (see
"Connecting the power adapter").
► When you no longer need to operate the Pocket PC as a USB Host, change the USB mode
back to USB Client.
A26391-K182-Z120-1-7619, edition 1
Operating the Pocket PC
With the optional USB Host cable you can use
your Pocket PC as a USB Host device and
connect various USB devices, such as a
MEMORYBIRD, to the Pocket PC.
59