Audi TT Coupe 2014 Owner's Manual page 190

System settings
- To disconnect a Wi-Fi audio player: Deactivate
Wi-Fi on your Wi-Fi enabled device. The device
will be removed from the list automatically.
Directory
Important: No mobile phones are connected to
the MMI via the Bluetooth remote SIM Access
Profile or the Handsfree profile.
- Connect new device: You can search for and
connect a new mobile phone. Or: Insert a SIM
card in the SIM card reader¢
- List of devices already bonded: Select your mo­
bile phone from the list of all mobile phones
which have already been bonded.
Further options
Further options may be available in the connec­
tion manager via the right control button de­
pending on the function selected.
Bluetooth settings
- Bluetooth: When this function is on�. the
Bluetooth symbol will appear on the infotain­
ment display. The Bluetooth discoverability of
the MMI can be switched on/off using the set­
tings visible/invisible. Devices which have al­
ready been bonded can connect via Bluetooth
even when discoverability is deactivated. Once
you have connected your mobile phone, you
should switch Bluetooth to invisible to prevent
the MMI from being discovered by third parties.
You can switch the Bluetooth function off. It is
then not possible to establish a Bluetooth con­
nection.
- Delete Bluetooth device: The selected mobile
phone/device is disconnected from the MMI.
- Display Bluetooth profiles: You can Connect or
Disconnect the Handsfree, Car phone and Di­
rectory/contacts individually.
- Bluetooth audio player: Switch this function on
� to be able to use the Bluetooth audio player
as a source in the Media menu.
- Bluetooth name: The Bluetooth name of the
MMI system (e.g. "AUDI MMI 2613") is dis­
played and can be changed.
188
Online settings*
- Data connection settings: Refer to ¢
- Data usage meter: The number of the data
- Connection status: The mobile network provid­
Wi-Fi settings*
page 126.
Refer to¢
SIM PIN settings*
- Automatic PIN entry: When this function is
- Deactivate PIN query: The system does not ask
- Change PIN: You can change the PIN code for
Network settings*
- Registration: To dial into your service provider's
- Network selection: You can use this function to
Configuring the data connection
packets sent/received via the MMI system is
displayed. Select Reset data meter to reset the
usage statistics to zero.
er for data services and the network status are
displayed.
page 143, Wi-Fi hotspot.
switched on�, the SIM PIN is stored in the
MMI after it has been entered for the first time.
You can save the PIN codes of four different
SIM cards on the MMI. If this function is
switched off, the PIN currently stored in the
MMI will be deleted. If the automatic PIN entry
function is activated, the system does not ask
you to enter your SIM PIN explicitly.
for the SIM PIN when you switch it on. The au­
tomatic PIN entry function is ignored in this
case.
your SIM card. First enter the existing PIN code
for your SIM card. The SIM PIN code can only
consist of numbers from Oto 9. The new SIM
PIN code has to be entered twice, as a precau­
tionary measure, and is stored on the SIM card.
mobile network automatically or to select a
network manually from the list of available
networks.
select the available networks for the current
position of the vehicle. This function is only
available when the manual setting is activated
for registration.
page 144,
�