Configuring The Data Connection - Audi TT Coupe 2014 Owner's Manual

Audi connect
-Access point (SSID):
work.
Password:
- A random MMI password is set at
the factory. This password can be changed. The
encryption type WPA2 requires the password to
be at Least 8 characters long. Please select a se­
cure password.
Discoverability:
- To switch the discoverability of
your Wi-Fi network on or off.
Network search
A list of the Wi-Fi networks available near you is
displayed .
.&_
WARNING
- Do not allow the features of the Wi-Fi hot­
spot to distract you from watching the traf­
fic - this can cause an accident.
- Laptop computers and similar devices can
only be operated safely when the vehicle is
stationary because of their weight; any
loose objects can be catapulted through the
vehicle in an accident and cause serious inju­
ries. Always make sure that such devices are
securely stowed while you are driving.
- No Wi-Fi devices may be used from the front
seats in the areas around the airbags while
the vehicle is being driven. Please also ob­
serve the safety warnings in the "Airbag sys­
tem" chapter under "Important safety notes
on the front airbag system" � page 210,
Front airbags.
CD
CAUTION
Please note that it is your responsibility to
take precautions regarding data protection,
anti-virus protection and protection against
Loss of data on mobile devices used to con­
nect to the Internet via the Wi-Fi hotspot.
Note
- You might require a separate mobile phone
contract with extra costs before you can use
the Wi-Fi hotspot. For more information,
contact your service provider.
- Depending on your mobile phone tariff, you
may be charged for receiving data packets
on line via the Wi-Fi hotspot, especially if
144
Name of the Wi-Fi net­ you are using the system abroad: We
strongly recommend that you use a data flat
rate. For more information, contact your
service provider.
- For more information on Audi connect serv­
ices, visit www.audi.com/connect.
Configuring the data
connection
Applies to vehicles: with Audi connect
You must configure a data connection before you
can use Audi connect services.
Configuring data connection
Fig. 140
.,. Se le ct :
button> right control button
!T EL !
nection manager .
.,. Select: right control button >
Data connection settings.
You can select when you would like the system to
establish an Internet connection in the
nection settings
menu. The online connection is
ended automatically when a requested Audi con­
nect service no Longer requires any further data.
The following options are available:
Connection setup
if
requested:
- A data connection will only be es­
tablished on request.
no request:
- A data connection will be establish­
ed automatically for the use of Audi connect
services.
never: A
- data connection will not be establish­
ed. It is then not possible to call up Audi con­
nect services.
When a data connection has been established, a
symbol indicating the active data
Con­
Online settings
>
Data con­
connection@
..,.