Advertisement
Quick Links
Introduction
The Wireless 1080P HDMI Video Kit - Mid-Range transmits
HDMI A/V signals up to 165ft (line-of-sight) wirelessly
and supports high-definition video signals up to 1080p
@60Hz.
Features and Benefits
Transmits HDMI A/V signals wirelessly up to 165ft,
•
no complicated cable or wire installation needed
An ideal solution to setup your home entertainment
•
system or remote display in apartments, condos
and where wiring is prohibited, also great for digital
signage, POP for small business office and
showrooms
Supports high-definition vivid video up 1080p
•
@60Hz, streaming flawless stereo audio, and works
with most HDMI equipped devices including
Blu-ray players, set-top boxes, AV receivers, cable/
satellite boxes, and computers
Built-in IR signal extension feature allows you to
•
control the playback device remotely
Plug-n-play installation, no software installation or
•
Wi-Fi connection required, wall-mountable case
design provides multiple placement options for
best signal broadcasting or reception angles
04-1048B
Wireless 1080P HDMI
Video Kit - Mid-Range
Installation Guide
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SIIG TX
Summary of Contents for SIIG TX
- Page 1 Wireless 1080P HDMI Video Kit - Mid-Range Installation Guide Introduction The Wireless 1080P HDMI Video Kit - Mid-Range transmits HDMI A/V signals up to 165ft (line-of-sight) wirelessly and supports high-definition video signals up to 1080p @60Hz. Features and Benefits Transmits HDMI A/V signals wirelessly up to 165ft, •...
-
Page 2: Package Contents
Package Contents Wireless 1080P HDMI Video Kit - Mid-Range (TX &RX) • IR blaster extension cable • IR receiver extension cable • Power adapters (x2) • Power extension cables (x2) • User Reference Guide • Specifications Transport Protocol HDbitT Signal Type... - Page 3 Product Layout Power LED Data Transmission LED Connection LED Figure 1: Transmitter (TX) - front side Power LED: On when the Transmitter is powered on • Data Transmission LED: • - Slow blinking: Establishing wireless connection - Fast blinking: The wireless connection is connected...
- Page 4 IR Out Reset HDMI In Power Jack Figure 2: Transmitter (TX) - rear side • Power Jack: Connects to the included power adapter • Reset: Press when the unit isn't working properly • HDMI In: Connects to your HDMI source with an HDMI cable (cable not included) •...
- Page 5 Power LED Data Transmission LED Connection LED Figure 3: Receiver (RX) - front side Power LED: On when the Receiver is powered on • Data Transmission LED: • - Slow blinking: Establishing wireless connection - Fast blinking: The wireless connection is connected successfully and transmitting data Connection LED: On when the wireless connection •...
- Page 6 Reset IR In Power Jack HDMI Out Figure 4: Receiver (RX) - rear side • Power Jack: Connects to the included power adapter • Reset: Press when the unit isn't working properly • HDMI Out: Connects to your HDMI display with an HDMI cable (cable not included) •...
- Page 7 IR Extension cables (20-60Hz Frequency Range) The IR Extension feature allows you to control your HDMI source device from a remote location. Figure 5: IR blaster Figure 6: IR receiver extension cable (IR OUT) extension cable (IR IN) • IR blaster extension cable (IR OUT): Plugs into the Transmitter's IR Out socket.
-
Page 8: Hardware Installation
Hardware Installation Power off all devices including your HDMI source and display. Connect your HDMI source to the Transmitter's HDMI IN connector. Optional: Connect the IR Blaster extension cable to the Transmitter's IR Out. Face the eye towards your HDMI device's IR window. This connection is needed only if you need to control your HDMI source from the remote location. - Page 9 Notice • Wireless signals transmitted through walls, glass, brick or other solid objects will cause signal loss and decrease the transmission distance • External wireless signals from microwaves, wireless mice and wireless keyboards will interfere with HDMI signal transmission • Keep the unit in a well ventilated environment to prevent it from overheating •...
- Page 10 Check whether the power adapters of Transmitter (TX) and Receiver (RX) are connected and power LED is ON. The TV displays "Please check the TX input signal": 1) Make sure the HDMI device is connected to the Transmitter (TX). 2) Use different HDMI cables.
- Page 11 This warranty is not transferable and is available only to the original purchaser of the product. SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship.
- Page 12 Fremont, CA 94538-3152, USA Phone: 510-657-8688 Wireless 1080P HDMI Video Kit - Mid-Range is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other names used in this publication are for identification only and may be trademarks of their respective owners.
Need help?
Do you have a question about the TX and is the answer not in the manual?
Questions and answers