ECU Part Number Label
The external part number label is located above the control
port of the module. If this label is not readable for any
reason, the Bendix part number is etched into the module
casting above the control port (See Figure 1). A Bendix
manufacturing date code is to the right of the part number
inscription.
There is an additional label under one of the covers that
shows a pin-out diagram for the 12-pin auxiliary connector.
Production
Data
YYWWDAAAAYYWWDXXXXXXXX
Knorr-Bremse
FIGURE 36 ‑ lAbel inFoRmAtion
BW2726 © 2013 Bendix Commercial Vehicle Systems LLC, a member of the Knorr-Bremse Group • All Rights Reserved • 6/13
40
Bendix Part Number
K123456
Component
K987654Vxx
Mxxx
X
Final 8 Digits
Show Initial
03
Software
Loaded
Log-on and Learn from the Best
On-line training that's available when you are — 24/7/365.
Visit www.brake-school.com.
Software Revision Level
The number of the initial software loaded on the ECU is
also indicated. The current software revision number can
be read using a diagnostic tool.
Document Revision Level
Please visit Bendix.com to ensure you have the latest
version of this document.
ID