BENDIX TABS-6 Service Data page 16

Diagnostic Trouble Codes
1st 2nd Diagnostic Code
Digit Digit Description
Valve Plausibility
9 1 Error - Extended
Brake Application
ABS Plausibility
9 2 Error - Excessive
ABS Activity
TRSP Plausibility
9 3 Error - Excessive
TRSP Activity
16
Possible Causes / Repair Information
Trailer System Braking
• Verify that there is no residual pressure in the trailer's control
(service) line.
• After repairs — or if no issues are found — clear the diagnostic code.
• If the diagnostic code persists, contact your local Bendix
representative before replacing the TABS‑6 Adv MC module.
• C heck for corroded/damaged wiring or connectors between the ECU
and the WSS.
• Check the air gap between the sensor and tone ring, pushing‑in
sensor(s) if needed.
• R otate the wheel and verify a min. of 0.25 VAC sensor output @ ~
0.5 RPS.
• Verify the condition of the sensor head.
• Verify the condition and retention power of the clamping sleeve.
• Verify the proper mounting of the exciter ring and condition of the
teeth.
• Check the wheel bearings for correct adjustment.
• Verify the sensor wire routing and clamping.
• After repairs — or if no issues are found — clear the diagnostic code.
• If the diagnostic code persists, contact your local Bendix
representative before replacing the TABS‑6 Adv MC module.
• Clear the diagnostic codes.
• If the diagnostic code persists, contact your local Bendix
representative before replacing the TABS‑6 Adv MC module.
(DTCs)
(continued)
J1587 J1939
(SID/ (SPN/
FMI) FMI)
057/07 1047/07
057/07 1047/07
057/07 1047/07