Page 1
Baby Walker Instruction manual Conform to EN1273:2005 Complies with standards AS/NZS ISO8124.1 ASTM F977-03 T A N D A R D Art. 888...
Page 2
Parts list Quantity Picture Tray 1pcs Seat Pad 1pcs Seat Support Toy tray 1pcs Anti-slippery 4pcs Mirror 2pcs Tail panel Large wheel 2Sets Wheel 2sets...
Page 3
1.Unpack all contents and please check that all parts are present before starting assembly. Please see PARTS LIST 2.To open the baby walker, raise the tray to the middle position as shown in figure 1. Figure 1 3. Assemble the four wheels as illustrated. Figure 2 4.
Page 4
6. Assemble the backrest panel as illustrated. Figure 5 7. Push crotch portion of seat pad inside out to form seat, so the fabric is on inside of pad. Figure 6 8. Insert the 8 round tabs on the seat pad into slots located around the seat ring, slide tabs through holes.
Page 5
10. Place walker on a solid flat surface with bottom of base facing upward. Insert the pins of the wheels into their housing, pressing them until they snap into position. Please check that wheels are locked into place as figure 9 and figure 10. Figure 9 Figure 10 11.
Page 6
Figure 13 16.Toy tray requires 2 "AAA" batteries (not included). Please use Philips head screwdriver to unfasten battery cover. Insert battery as figure 14. Secure battery cover back. Caution: Old and new batteries(alkaline standard or rechargeable )should not be mixed in use. Remove battery before storing the toy tray. Figure 14 WARNING --- Never leave the child unattended WARNING...
Page 7
Discontinue using this walker should it become damaged or broken Never carry this walker with child in it. Never adjust seat while child is in product. ~ DO NOT lift or carry by tray, toy tray, or toys. ~ DO NOT use this walker until baby can sit up unassisted. ~ To reduce the chance of child slipping out of seat, check that both feet of child touch the floor.
Need help?
Do you have a question about the 888 and is the answer not in the manual?
Questions and answers