Related Manuals for Neilsen CT0827
Summary of Contents for Neilsen CT0827
- Page 1 115MM ANGLE GRINDER CT0827 ORIGINAL INSTRUCTIONS Cannon Tools Limited Address:20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM ...
- Page 2 In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: ANGLE GRINDER Model: CT0827 Applicable EC Directives: EC Machinery Directive 2006/42/EC EC Directive of Electromagnetic Compatibility 2014/30/EU Harmonized standards：...
- Page 3 1. DESCRIPTION OFTHE SYMBOLS The use of symbols in this manual is intended to draw your attention to possible risks. The safety symbols and the explanations that accompany them must be perfectly understood. The warnings in themselves do not remove the risks and cannot replace correct actions for preventing accidents.
- Page 4 Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) Electrical safety Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
- Page 5 clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
- Page 6 warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result inelectric shock, fire and/or serious injury. b) Operations such as sanding, wire brushing, polishing or cutting-off are not recommended to be performed with this power tool. Operations for which thepower tool was not designed may create a hazard and cause personal injury.
- Page 7 i) Keep bystanders a safe distance away from work area. Anyone entering the work area must wear personal protective equipment. Fragments of workpiece or of a broken accessory may fly away and cause injury beyond immediate area of operation. j) Hold power tool by insulated gripping surfaces only, when performing an operation where the cutting accessory may contact hidden wiring or its own cord.
- Page 8 movement at the point of pinching. Abrasive wheels may also break under these conditions. Kickback is the result of power tool misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below. a) Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces.
- Page 9 5. INTENDED USE The machine is intended for roughing and brushing metal and stone materials without using water. 6. TECHNICAL SPECIFICATIONS Model: CT0827 Voltage: 230 -240V~ 50 Hz Power consumption: 850 W Rated speed: 12000/min...
- Page 10 NOISE/VIBRATION INFORMATION Measured sound values determined according to EN 60745. Wear hearing protection! Vibration total values (triax vector sum) determined according to EN 60745: The vibration emission level given in this information sheet has been measured in accordance with a standardized test given in EN 60745 and may be used to compare one tool with another.
- Page 11 1. Spindle-lock button 2. Disc guard 3. Off/on switch 4. Auxiliary handle 5. Carbon brushes 6. Flange spanner 7. Flanges 8. OPERATION Before use Before making assembly, changing and adjustment for any accessory, disconnect the tool from the mains supply to avoid any unintentional starting. Please always check the mains supply voltage before use! It must correspond with the rating label on the appliance.
- Page 12 Press On/Off switch push forward to lock position, then release the On/Off switch. The angle grinder will continue to operate until the on/off switch is released. To release the on/off switch, just press switch again. It will return to original position CAUTION! Always carry out a test run before starting work and after every tool change! Always ensure that the tools are in good condition, correctly mounted...
- Page 13 CAUTION! Check the diameter of disc regularly during use. If it is less than 80mm, replace it! Working advice After heavily straining the power tool, continue to run it at no-load for several minutes to cool down the grinding tool. Grinding discs become very hot while working;...
- Page 14 bonded wheels (resin, shellac, rubber) will stand rough handling. As the wheel wears down in use, the effective peripheral surface speed will reduce if the rotational speed remains constant and may result in a reduced grinding efficiency. To make sure the machine work smoothly, the wheel should be replace with the maximum size less than 80 mm.
- Page 15 PARTS DIAGRAM...
- Page 16 PARTS LIST Component Quantity Component Quantity upper plate bearing plate disc screw M4 x 10 bottom plate rotor wheel guard winding screw M5 x 20 screw ST3.9 x 70 screw M5 stator dust cover bearing head cover bearing coat screw M4 x 6 pushing button spring washer...
- Page 17 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...