Advertisement
- Plug the charging cable into XBOARD. Make sure green indicator lights up.
Then connect the cable with the power supply (100V ~ 240V; 50, 60 Hz).
- The red light indicates that it has begun to charge. Otherwise check
whether the cable is connected.
- When the indicator light goes from red to green, it indicates that the
battery is fully charged. At this time please stop charging. Overcharging will
affect lifetime use.
- Charge and store battery as suggested, otherwise it will damage the
battery. First charging takes ca.2.5h; all following charging cycles 2h.
- Keep the charging environment clean and dry.
7.3 Temperature
- Please switch off your XBOARD before charging
- The best charging temperature is 0⁰C - 40⁰C (suggested 10⁰C - 30⁰C). Too
cold or warm conitions will not charge the battery fully.
7.4 Description of battery
Lithium-ion battery
Charging time ca.2h
Voltage 36V
Initial capacity 2-4Ah
Working temperature -15⁰C up to +50⁰C
Storage (20⁰C-25⁰C) 12 months
Storage humidity 5% -95%
8. Maintenance
XBOARD requires the user to do routine maintenance.
Before performing the following operations, please ensure the power and
charging cable are disconnected. If the battery is charging, the operation is
not allowed.
8.1 Clean XBOARD
- Disconnect the charger and and turn off XBOARD
- Wipe the cover with clean dry cloth
- Avoid using water or other liquids on XBOARD for cleaning. If water or
other liquids seep into XBOARD, it will cause permanent damage to the
internal electronics.
- Clean the tires with cloth and check regularly that there are no obstacles
on or around the wheels (garbage, hair etc.).
8.2 Storing XBOARD
- Fully charge your battery before storing
- If you store XBOARD for more than one month, it is recommendable to
charge the battery each 30days for the sake of its long lifetime
- If the storage ambient temperature is below 0⁰C, please do not charge.
You should take XBOARD into a warm environment (suggested 10⁰C - 30⁰C)
for charging.
- To prevent dust from entering XBOARD, you should cover your XBOARD
- Store XBOARD indoors in a dry and suitable temperature. If you do not use
it for a long time, please do not connect the power.
Users who disassemble XBOARD will void the warranty.
9.Warranty
XBOARD Warranty covers all defects that emerge from full compliance
usage of XBOARD and its charger during the warranty period. The warranty
is void if the user has not followed precisely all instructions and conditions
in the Product Manual. Warranty period is effective as of date of purchase
and natural attrition is not subject to warranty.
The defects caused by misuse of the product or by mechanical impairment
(incl. liquid- or moist damages) are not covered by the warranty. The same
applies to inappropriate usage of the product and its natural attrition. If the
product appears to have above mentioned flaw, the product needs to be
taken to the service, appointed by Xboard OÜ. Provided the product is
repairable, a repairment quotation is proposed to the client. Repairment
shall be commenced only after the client has accepted the repairment
proposal.
Should it appear during locating the malfunctioning cause that the flaw is
caused by the liquid- or moist damage and/or mechanical impairment, it will
void the warranty and the product will be subject to maintenance only at
buyers cost. During the first six months rom the purchase date, locating
5
Advertisement
