Installation - Daewoo KOR-122M0A Service Manual

INSTALLATION

1. Examine the oven after unpacking.
Check fork damage such as a misaligned door, broken door or dent in the cavity.
If any damage is visible, DO NOT INSTALL, and notify your dealer immediately.
2. Level, flat location.
Install the microwave oven on a level, flat surface.
3. Ventilation
Do not block air vents. If they are blocked during operation, the oven may overheat and eventually cause
a failure. For proper ventilation, allow 3 inches of space between oven top, sides, rear and adjacent
surfaces.
4. Away from radio and TV sets.
Poor television reception and radio interference may result if the oven is located close to a TV, radio,
antenna, fee, etc. Place the oven as far from them as possible.
5. Away from heating appliances and water taps.
Keep the oven away from heat, steam or splashing liquids. These things can adversely affect oven wiring
and contacts.
6. Power supply
This microwave oven requires a power supply of approximately 20 Amperes, 120 Volts, 60Hz and a
grounded outlet. A short power cord is provided to reduce the risk of the user becoming entangled in or
tripping over a longer cord. Longer cord sets or extension cords are available and may be used if care is
exercised.
If an extension cord is used, the marked electrical rating of the cord should be at least as great as the
electrical rating of the oven.
The extension cord must be a grounding-type 3 wire cord. The longer cord should be arranged so it does
not drape over the table top or counter where children can pull on it or trip over it.
When use 3-pronged plug
3-prong plug
3-prong Receptacle
Receptacle
Box cover
When use a grounding adaptor, make
sure the receptacle box is fully grounded
Grounding Lead
Grounding Adaptor
7
Receptacle Box cover
Receptacle