How Do I Enroll My Fingerprint - Huawei MT7-L09 Faq

HUAWEI MT7-L09 Smartphone Hotline FAQs
If you have entered incorrect fingerprints for the specified number of times, your phone will
begin a 30-second countdown, during which time you can only unlock the screen using your
password. After the 30 seconds, you can unlock the screen using your fingerprint again.

1.6.2 How do I enroll my fingerprint?

After you set a PIN or password, follow the onscreen instructions to enroll your fingerprint.
When you are enrolling your fingerprint, press your finger against the fingerprint sensor on
the back of your phone for about 0.5 seconds, and continue to press the edges of your finger.
A total number of 6 fingerprint images will be enrolled.
It will be easier for your phone to read your fingerprint if the fingerprint area you enrolled is
larger. Therefore, carefully enroll the center area and the edges of your fingerprint.
Note the following:
1.
2.
3.
4.
Issue 01 (2014-09-01)
Fingerprints change with different environmental elements, such as temperature,
humidity, power of hydrogen, and oiliness. The fingerprint enrolling and reading are also
affected by fingerprint patterns.
Before you enroll your fingerprint, clean your fingers. Keep your fingers in a moderate
humidity and oiliness conditions. If your fingers are too dry or oily, your phone may fail
to read your fingerprint.
If your fingers often sweat, it is recommended that you use tissues to wipe your fingers
before you unlock the screen.
You only need to slightly press your finger against the sensor to enroll your fingerprint.
Do not scratch the fingerprint sensor. If your fingers are dry, you may need to press your
finger against the sensor more strongly.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Basics
8