Page 1
BluePin 2 Instruction Manual i120 Please read this manual carefully before operating and save it for future reference. Have a question? Please visit http://www.i-Luv.com...
BluePin 2 V10M10_IM_EN_11262007 USER SAFETY GUIDE INSTRUCTIONS ON ENVIRONMENT PROTECTION Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packaging will inform about the methods of disposal.
Page 4
BluePin 2 V10M10_IM_EN_11262007 USER SAFETY GUIDE Important Safety Instructions-Continued sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 7. Power sources – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
Page 5
BluePin 2 V10M10_IM_EN_11262007 USER SAFETY GUIDE FCC Notice (USA)-Continued communications, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. •...
Page 6
BluePin 2 V10M10_IM_EN_11262007 USER SAFETY GUIDE Additional Safety Instructions • When not in use, keep your device in a safe place where it will not be bent or crushed. • Keep this device away from children. This is a small item and may be swallowed by children and result in serious harm.
Page 8
BluePin 2 V10M10_IM_EN_11262007 GETTING STARTED BluePin 2 Thank you for purchasing the i120 from iLuv. Please keep this manual in a safe place for future reference. • Turns its host player into a Bluetooth system • Answer or make a phone call wirelessly when Bluetooth mobile phone is paired.
Page 9
BluePin 2 V10M10_IM_EN_11262007 GETTING STARTED What is Bluetooth wireless technology? Bluetooth wireless technology is a short-range wireless communication technology intended to replace the cables connecting electronic devices while maintaining the high level of security. With Bluetooth wireless technology, two devices can be connected at the same time without the need to face each other or the concern of interference from other wireless communication within its optimum range of 300 feet.
Page 11
OPERATING INSTRUCTIONS Operating the BluePin 2 The i120 has no independent power source (battery) and must be connected to an iLuv device in order to operate. Pairing in TX (Send) Mode Connect the i120 to the 10pin connector on your iLuv audio device.
Page 12
BluePin 2 V10M10_IM_EN_11262007 OPERATING INSTRUCTIONS Pairing in RX (Receive) Mode Connect the i120 to the 10pin connector on your iLuv audio device. Press the SEND/RCV button on the side of the BluePin 2 until the RCV indicator light shows. Follow the pairing instructions for the device with which you wish to pair the i120 (mobile phone, MP3 player, stereo headset, etc.).
Page 13
3. There is no sound from the iLuv device or paired device • Make sure the volume is turned up on your iLuv music device and/or the connected Bluetooth device.
Page 14
BluePin 2 V10M10_IM_EN_11262007 SPECIFICATIONS • Bluetooth Core: Version 2.0 • Bluetooth Profile: HFP, HSP, AVRCP, A2DP • Communication Range: Up to 300ft (optimized), Class 1 • Powered by the host system - 13 - www.i-Luv.com...
Page 16
FAX: 516-626-7105 website: www.i-Luv.com iLuv is a trademark of jWIN Electronics Corp. Features and specifications are subject to change without prior notification. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by jWIN Electronics Corp.
Need help?
Do you have a question about the BluePin 2 i120 and is the answer not in the manual?
Questions and answers