4
Installation
Flat Mount
Secure the HVR to the surface with self-tapping
screws or rivets.
Ensure that the front panel of the HVR
remains accessible and there is a minimum
2.5 inches of clearance for cables.. Do not
install the HVR in an area of the vehicle cabin
that could interfere with the safe operation
of the vehicle.
Security Cover
After connecting all needed cables to the
rear of the HVR as shown in the Main Wiring
Diagram, secure the Security Cover with the
included Phillips head screws as shown in the
diagram.
OBSERVER 4112 HVR HARDWARE USER GUIDE