Specifications - Safety Vision OBSERVER 4112 HVR User Manual

8
Appendix A: Specifications

SPECIFICATIONS

Part No. 4112-HVR
OS Support Linux 3.0.8
Cameras Supported Up to 8 analog and/or AHD + 4 IP (requires PoE switch)
Video Outputs 2 channels
NTSC: 8 × 1080p at 10 FPS (AHD) + 4 × 1080P at 30 FPS (IP) or
8 × 720p at 30 FPS (AHD) + 4×1080P at 30 FPS (IP) or
8 × D1 at 30 FPS (AHD) + 4 × 1080P at 30 FPS (IP)
Frame Rate
PAL: 8 × 1080p at 10 FPS (AHD) + 4 × 1080p at 30 FPS (IP) or
8 × 720p at 25 FPS (AHD) + 4 × 1080p at 30 FPS (IP) or
8 × D1 at 25 FPS (AHD) + 4 × 1080P at 30 FPS (IP)
Image Quality 8 levels
Storage 1 × SATA II 2 TB HDD or 1 TB SSD
Manual/schedule/alarm (sensor trigger, speed, acceleration, video loss,
Recording Modes
temperature)
Mirror Recording 1 × SD card (256 GB max)
Pre-Event Recording Configurable up to 60 minutes
Post-Event Recording Configurable up to 30 minutes
Ethernet RJ45 × 1 (10/100 M/1000M)
Wi-Fi (Antenna Required) Embedded module (802.11b/g/n)
GPS (built-in) Fleet tracking, speed detection, and sync time
Accelerometer 3 dimensions: X, Y, and Z axis
Front: 1 × USB 2.0
Interfaces
Rear: 1 × USB 2.0, 2 × RS232, 2 × RS485
Sensors 8 inputs, 2 outputs
Power Input 8 ~ 36V DC, ACC
Operating Temperature -40° F ~ 158° F (-40° C ~ 70° C)
Dimensions (w × h × d) 9.02 in × 4.3 in × 11.9 in (229.0mm × 108.3mm × 302.7mm)
Certifications CE, FCC, ISO7637, MIL-STD-810F, ROHS, IEC61373, EN50-155, EN60068-230
OBSERVER 4112 HVR HARDWARE USER GUIDE