Advertisement
Quick Links
Camera Quick Install Guide
Thank you for purchasing a DIR Series CCTV Surveillance Camera.
This Quick Install Guide covers basic setup, installation and use of your surveillance system.
For the full user manual, instructional videos, tips on using your surveillance system &
warranty information, please visit: http://www.securview.biz/
Applicable Models
VSCVI4MPDIR
VSCVI4MPDIR2.8
VSCV1MPDIRV4
VSCV2MPDIRV4
DIR Series
Available in 1.0MP, 2.0MP and 4.0MP variants.
4.0MP Fixed HDCVI Mini Dome
4.0MP Fixed HDCVI Mini Dome (2.8mm)
1.0MP Fixed HDCVI Mini Dome
2.0MP Fixed HDCVI Mini Dome
Advertisement
Related Manuals for SecurView VSCVI4MPDIR
Summary of Contents for SecurView VSCVI4MPDIR
- Page 1 Thank you for purchasing a DIR Series CCTV Surveillance Camera. This Quick Install Guide covers basic setup, installation and use of your surveillance system. For the full user manual, instructional videos, tips on using your surveillance system & warranty information, please visit: http://www.securview.biz/ Applicable Models VSCVI4MPDIR 4.0MP Fixed HDCVI Mini Dome...
-
Page 2: Important Safeguards And Warnings
Refer to the company’s final explanation if there is any doubt or dispute. • The company is not liable for any loss caused by the operation which is not followed by the manual. Securview Victory Series... - Page 3 Note: Refer to the disk for more details, check and download corresponding user’s manual and tool. Before installation, please open the package and check all the components are included. Contact your local retailer ASAP if something is broken in your package www.securview.biz...
- Page 4 Pre-install information Included components DIR Series HDCVI Camera Quick Start Guide Installation Accessories Bag: • Position installation map • Expansion bolts • Self-tapping screws Dimensions Device framework Securview Victory Series...
- Page 5 There is only one video port for some cameras, which is shown in the image above; it outputs HD video signal by default, you’ll need to enable self-adaptation function in the OSD menu to switch to standard definition (SD) video signal www.securview.biz...
-
Page 6: Installing The Camera
6. Insert the enclosure into the pedestal together with the dome body, turn the locking screws clockwise and fix them preliminarily; rotate enclosure and dome body to a proper monitoring location. 7. Tighten the locking screws to fix it completely. 8. Your setup is complete! Securview Victory Series... - Page 7 All the designs and software here are subject to change without prior written notice. If there is any uncertainty or controversy, please refer to the final explanation of us. Please visit our website or contact your local service engineer for more information. www.securview.biz...