Sharp AQUOS LC-80LE661U Setup Manual page 14

AC power supply
POWER (On/Standby)
3
When turning on the TV for the fi rst
POWER
time, press POWER on the television.
4
Insert the batteries into the remote
control unit. (See page 24.)
NOTE
• Speakers cannot be detached from the TV.
• The TV angle cannot be adjusted.
Turning On/Off the Power
Press POWER on the TV or on the remote
control unit to turn the power on.
NOTE
• The Initial Installation starts when the TV
powers on for the fi rst time. If the TV has
been turned on before, the Initial Installation
will not be invoked. For changing the settings
of the Initial Installation, please select "Easy
Setup" on the Initial Setup menu.
Press POWER on the TV or on the remote
control unit again to turn the power off.
• The TV enters standby and the image
on the screen disappears.
NOTE
• If you are not going to use this TV for a long
period of time, be sure to remove the AC
cord from the AC outlet.
• Weak electric power is still consumed even
when the TV is turned off.
Experiencing HD Images
An HDTV without an HD source is just an
ordinary TV.
To enjoy HD images on the TV, you
should get HD programming from the
following:
• Over-the-air broadcasting via HD quality
antenna
• HD cable/satellite subscription
• HD compatible external equipment
NOTE
• For information on updating to HD
programming, ask your cable/satellite
service provider.