Li-Po Battery Warning - Brookstone Flight Force Manual

LI-PO BATTERY WARNING

This device contains a Lithium-Polymer battery. The battery must be recycled or disposed
of properly. Contact your local waste management office for information on battery
recycling or disposal.
Use only the supplied cable to recharge the battery. Improper charging may damage the
battery and the device.
Do not attempt to open the rechargeable battery or battery pack. There are no
serviceable parts inside.
Keep the battery out of reach of children. If swallowed, consult a physician immediately.
Do not expose the battery to high temperatures or dispose of battery in a fire as it may
explode. The battery may also explode if damaged.
6
BC
LOCATION OF PARTS
CHARGING THE DRONE'S BATTERY
The Flying Tank Drone includes a rechargeable Lithium-Polymer battery. Charge the
battery before first use.
To charge the drone's battery:
1. Connect the charging cable to the Charging Terminal on the battery, ensuring that
the pins align properly. (You do not have to remove the battery from the Battery
Compartment to charge the battery.)
2. Insert the charging cable's USB connector into a USB port on an active device, such
as a computer, USB adapter, or power bank. The LED in the charging cable is red
while charging. The LED turns off when fully charged.
3. When fully charged, disconnect the charging cable.
WARNING: Do not operate the drone when the battery charge is low. The battery may be
damaged and may no longer accept a charge. Land the drone immediately and recharge
the battery.
Rotor Motor
Battery Compartment
Rotor Blade
Battery
Charging Terminal
Power Connector
7