Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Philips ProScribe CV
Summary of Contents for Philips ProScribe CV
- Page 1 User’s Manual ProScribe CV 12 inch Wireless Thin Client (Rev. 0.01 )
- Page 2 This manual is copyrighted with all rights reserved. Under the copy rights law, this manual may not be copied, in whole or part, without written consent of Philips. Under the law, copying includes translating into another language or format. The monitor described in this manual, has been certified/registered by the safety agencies/regulatory authorities as model n°...
- Page 3 FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 1.5 cm during normal operation. This device and its antenna (s) must not be co-located or operating in conjunction with any other antenna or transmitter. ProScribe CV...
-
Page 4: Main Features
The ProScribe offers a full suite of utilities and multiple plug-and-play interfaces for easy integration into any type of IT environ- ment, and specifically: - Full-size XGA resolution: 1024 x 768 - Basic version with 512MB RAM and 1GB flash memory - Two USB ports - An 100Mbps RJ-45 Ethernet interface Approved for medical applications The Proscribe meets the medical safety and electromagnetic requirements of IEC 60601-1 and IEC 60601-1-2, if used with power supply unit certified according to the same standard (Medical Grade PSU; check the d.c. supply connector pin-configuration of the PSU before connecting it to the unit). Unit shall be used, with power supply. NOTES: 1 - WiFi and the WiFi logo are the registered trademarks of the Wi-Fi Alliance. 2 - Microsoft and Windows, Windows XP and Windows RDP are registered trademarks of Microsoft Corporation 3 - All other trademarks and registered trademarks are property of their respective owners. ProScribe CV... - Page 5 ProScribe will not turn ON ........5 my system does not run smoothly .......5 how do i turn off my ProScribe ........5 when I use the stylus pen ..........5 SAFETY AND PRODUCT CARE INSTRUCTIONS ..26 to clean the screen ............26 to clean the case ............26 PRECAUTIONS ..............7 installation ..............7 handling ................7 maintenance ..............7 transportation ..............7 disposal of the LCD monitor ........28 IDENTIFICATION LABEL ..........29 INDEX ..................0 ProScribe CV...
-
Page 6: Technical Information
LCD Panel Characteristic 12.1 “ TFT LCD panel (Mini required : XGA 1024 x 768 resolution for 12.1” ) , LVDS I/F Audio System AC97 internal microphone and speaker; stereo (supported via earphone jack) Durability Rugged anti-shock design with standing 1 meter drop / IP21 water and dust resistant construct- ion (front side) PAD I/O • x USB •1 x D-SUB 9 pins which supports Ethernet signals and power DC in •1 x Speaker •1 x Internal microphone LED indicator •1 x WLAN LED •1 x Power green LED (ON / OFF status) Button AND Controls • 4 x hot keys (three customized) • 1 x Reset button • 1 x Four-way direction key with Enter Power Supply requirement • DC_In 24V (3.42A) ProScribe CV... -
Page 7: Installation
2.1.0 INSTALLATION See BBRS ver. 0.1 PMS CV customer spec. paragraph. 5.1.3 cod. 4522 901 05890 While unpacking the ProScribe, inspect it and other package contents for shipping damage that could cause a fire or shock hazard. Immediately report any shipping damage to the carrier or transportation company and contact customer service for assistance. Keep all packing material in case you need to ship, store or return the monitor. NOTE: This user’s manual is available in electronic format only, installed on the PAD and accessible by double click up on the relevant icon on the desktop ProScribe CV... -
Page 8: Dimensions
3.1.0 DIMENSIONS 313,4 60,5 (fig. 8a) 3.2.0 WEIGHT Weight without packaging : 2,17 Kg. ProScribe CV... -
Page 9: Input Instruction
4.1.0 INPUT INSTRUCTION 4.1.1 RIGHT VIEW 1. USB 2.0 port type A . USB .0 port type B . Switch reset (fig. 9a) 4.1.2 LEFT VIEW 1. D-SUB 9 pins male Pinning configuration: 1 Screen (PE) 2 TX+ 3 RX+ V 5 V 6 TX- 7 RX- 8 0V 9 0V (fig. 9b) ProScribe CV... -
Page 10: Back View
4.1.4 BACK VIEW 1. Speakers 2. Desktop feet support mounting screw holes (2 x M3) 3. VESA MIS-D mounting screw holes (4 x M4) . TSM swing-arm and pedestal mounting screw holes ( x M) (fig. 10a) ProScribe CV... -
Page 11: Control Panel Description
5.1.0 CONTROL PANEL DESCRIPTION 1. Battery LED . Programmable buttons 3. Track stick buttons 4. Track stick 5. Programmable buttons 6. Microphone 7. WLAN status LED (fig. 11a) ProScribe CV... -
Page 12: Before You Begin
• after applying the desired modifications, enable the EWF. Procedure to enable EWF (valid only for software release ≤ 0LBMXNF5107, 0LBMXN1F206) • press “start” button then “Run...” and type “cmd” • on the console window type: ewfmgr c: -enable” • wait for the command execution • reboot (it is required for EWF to be really enabled) (valid only for software release ≥ 0LBMXNF5108, 0LBMXN1F207) • press “start” button then “Run...” and type “ewfe” • the ProScribe will logout and reboot automatically • now the CF is write disable, so modification are not stored into the CF card, meaning that modifications will be lost on reboot. CAUTION: (valid only for software release ≤ 0LBMXNF5107, 0LBMXN1F206) Reboot the ProScribe first and disable EWF before installing any new software. Installing software and disabling EWF afterwards is not supported by Windows XPe and results in some cases in a software crash. 6.2.1 STYLUS RE-CALIBRATION When the pad is powered on for the first time, the pad need to be calibrated. See par. 8.1.0 for instructions. ProScribe CV... -
Page 13: Power Saving Mode
• Navigate through: “START -> Settings -> Control panel -> Power Options” and select the Power Schemes that best meets your needs. • Navigate through: “START -> Settings -> Control panel -> Tablet and Pen Settings”. • Select the “display” TAB • Choose the desired Brightness level Power Schemes Display 6.2.3 SET DATA AND TIME Double click on the screen display window on the task bar (in low to the right) set new data or time clock. 6.2.4 WLAN SETUP The WLAN setup is strictly dependent on the existing wireless network infrastructure. A example of WLAN setup is depicted: • From the Winbond Wireless Utility icon on the Windows Taskbar select: “Start Windows Zero Configuration” ProScribe CV... -
Page 14: Ethernet Lan Setup
• Navigate through : “START -> Settings -> Control Panel -> Network Connections -> Wireless Network Connection” and select one of the available networks. • If required, insert a network key or password. • To further configure the WLAN parameters on the “Wireless Network Connection” “Related Tasks” panel, select “Change advanced settings”. • The “Wireless Network Connection Properties” dialog pops up, select “Wireless Networks” tab • Select the preferred network and press “Properties” to adjust the authentication / encryption parameters. 6.2.5 ETHERNET LAN SETUP Setting up an Ethernet connection is just a matter of plugging the Ethernet cable in the RJ45 jack. It is advised to switch off the WLAN connection in order to save battery power. 6.2.6 SCREEN BRIGHTNESS The brightness level can be adjusted by going to: “Control Panel > Tablet and Pen Settings > Display > Screen Brightness > Powered by Batteries” and by moving the slide bar to “Bright”. ProScribe CV... -
Page 15: Data Input To The Touch Screen
7.1.0 DATA INPUT TO THE TOUCH SCREEN 7.1.1 TOUCH THE SCREEN Use a stylus pen to move the mouse cursor or select the desired desktop icon or menu. (fig. 15a) NOTE: The stylus pen is designed for your screen. The stylus pen can be provided upon customer request. Use of fingertip or other pointers could damage your screen. 7.2.1 LEFT OR RIGHT CLICK EMULATION Users accustomed to a mouse device often right click for quick access to command options for an icon. The stylus pen offers a similar command function. Click on taskbar mouse icon to select “left” or “right” click emulation. NOTE: default “left” (fig. 15b) (fig. 15c) ProScribe CV... -
Page 16: Touch-Panel Calibration
• Tap Start -> Settings -> Control Panel • Double click “Touch Panel” Button • Select “Calibration” tab • Enable the Check-Box -> Press “Apply” Button • Disable the Check-Box -> Press “Apply” Button -> Press “Calibrate Now” • Calibrate Touch-Panel • Press “Update” Button • Press “OK” button Tap Start -> Settings -> Control Panel Double click “Touch Panel” Button ProScribe CV... - Page 17 Select “Calibration” tab Enable the Check-Box -> Press “Apply” Button ProScribe CV...
- Page 18 Disable the Check-Box -> Press “Apply” Button -> Press “Calibrate Now” Calibrate Touch-Panel ProScribe CV...
- Page 19 Press “Update” Button Press “OK” button ProScribe CV...
-
Page 20: Wlan
10.1.0 WLAN Your ProScribe includes a wireless LAN module. 10.1.1 START A CONNECTION Method One Tap (right click) on the WinBond network icon that resides in the taskbar at the bottom of your screen. • Select “Restore” •The “winbond wireless utility” pops-up •Select the “Site Survey” tab • Select one of the available networks Press the “config” button to adjust the wireless network properties Method Two The WLAN setup is strictly dependent on the existing wireless network infrastructure. A example of WLAN setup is depicted: • From the Winbond Wireless Utility icon on the Windows Taskbar select: “Start Windows Zero Configuration” • Navigate through : “START -> Settings -> Control Panel -> Network Connections -> Wireless Network Connetion” and select one of the available networks. • If required, insert a network key or password. • To further configure the WLAN parameters on the “Wireless Network Connection” “Related Tasks” panel, select “Change advanced settings”. •The “Wireless Network Connection Properties” dialog pops up, select “Wireless Networks” tab • Select the preferred network and press “Properties” to adjust the authentication / encryption parameters. ProScribe CV... - Page 21 10.1.2 When the connection is ready, you may be required to launch a remote control application to communicate between your ProScribe and the host computer. The ProScribe ships with two applications to do this: • Remote Desktop Connection connects to a Window server • Critrix ICA Manager connects to a Citrix server. ProScribe CV...
- Page 22 To complete the connections with Remote Desktop Connection or ICA Manager, you will need information including user name, password and network IP. Ask your network administrator to provide the required setup information. 10.2.1 LAN The D-SUB 9 pins is used to connect your ProScribe to a LAN network. Pinning de nition for sub-D (male) Pinning configuration Signal Signal Screen (PE) 24 V 24 V (fig. 22a) ProScribe CV...
-
Page 23: Featured Software Application
ProScribe to function as a terminal when connected to a server running Citrix MetaFrame Software. The Citrix ICA Client for Windows lets you make an ICA connection to a Citrix server. When the ICA connection is established, you can access applications and work with files as if you were working at the Citrix server itself. • To launch Tap the “Citrix Program Neighbourhood” icon on the desktop 11.4.1 MICROSOFT RDP This is a terminal services client that allows you to connect your ProScribe to a Microsoft Windows terminal server. • To launch Tap the “remote desktop connection” icon on the desktop 11.5.1 WINDOWS MEDIA PLAYER This is a multimedia application that plays audio and video files. For example, you can enjoy MP3 format music in or play a MPEG-4 format video clip from a file located on the pad or from the network. • Tap on START • Tap on PROGRAMS • Tap on WINDOWS MEDIA PLAYER ProScribe CV... -
Page 24: Hot Key Utility
NOTE: The Windows XPe version of the ProScribe might not contain all the required components and drivers required to operate your peripherals. Please visit the website of the supplier to download the missing software items. 11.9.0 RUGGEDIZED DESIGN Your ProScribe is specially designed to withstand such as a physical impact or a liquid spill. • Drop resistant It has the anti-shock design to resistant to 3 feet drop test (without the hand-carry set mounted: kickstand, hand strip left/right stand adapter). • Liquid spill ProScribe meets IP1 requirement for water and dust resistance. ProScribe CV... - Page 25 The mouse arrow does not point to the center of icon as you intend. It might be due to the viewing angle or the stylus may require calibration. • Users accustomed to a mouse device use a right click for quick access to command options of an object. The stylus pen offers a similar command function. Here’s how: See parag. 7..1 ProScribe CV...
-
Page 26: Safety And Product Care Instructions
13.2.1 TO CLEAN THE CASE: 1. For normal cleaning, use a soft, dry cloth. . For heavy duty cleaning, apply a small amount of a mild non-abrasive, ammonia-free, alcohol-free detergent onto a clean, soft, lint-free cloth and wipe the case surface. ProScribe CV... -
Page 27: Precautions
Never use any solvent on the front polarizer or module as this may cause permanent damage. Wipe off water drop immediately. Long contact with water may cause discoloration spots. When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.” 13.4.0 Transportation Disconnect all cables from the monitor when transporting. When you transport this device, hold the base sections of the display stand firmly in both hands. If you drop the device, you may be injured or the monitor may be damaged. When you transport this device for repair or shipment, use the original cardboard box and packing materials. ProScribe CV... - Page 28 For more information about where you can drop off your waste equipment for recycling, please contact your local city office, or your supplier’s office. • For countries outside the European Union Disposal of electrical products in countries outside the European Union should be done in line with local regulations. 14.1.1 Dispose of coin battery inside of the ProScribe (Mounted on main board): The coin battery contain Perchlorate Material-special handling may apply, www.dtsc.ca.gov/hazardouswaste/perchlorate. COIN BATTERY ProScribe CV...
-
Page 29: Identification Label
15.0.0 IDENTIFICATION LABEL The identification label is visible on the back monitor side. 9919 320 51451 ProScribe CV Code number (12NC) Type number Date of Manufactured 2007 - 02 AN00yyww001001 Serial number: AN=Origin code (FIMI) 00 = Technical level yy= Year (07=2007) ww= Week (01 to 52) 001001= progressive number... -
Page 30: Index
MICROSOFT RDP RUGGEDIZED DESIGN WINDOWS MEDIA PLAYER WORDPAD FEATURED SOFTWARE APPLICATIONS GETTING STARTED 1 ETHERNET LAN SETUP 1 POWER SAVING MODE 1 SCREEN BRIGHTNESS 1 SET DATA AND TIME 1 STYLUS RE-CALIBRATION 1 WLAN SETUP 1 IDENTIFICATION LABEL 9 INPUT INSTRUCTION 9 BACK VIEW 10 LEFT VIEW 9 RIGHT VIEW 9 INSTALLATION 7 INTRODUCTION Approved for medical applications Easy to integrate, deploy and maintain Flexible to fit any vertical application Main features POWER SAVING MODE 1 PRECAUTIONS 7 Handling 7 Installation 7 Maintenance 7 ProScribe CV... - Page 32 Specifications subject to change without notice. All dimensions shown are approximate. Copyright © 007 FIMI S.r.l. Saronno - Italy All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner Printed in Italy 4519 206 1019.1 4519 206 10191...