Introduction; Box Contents; Support; English - ION Total PA Pro Quick Start Manual

Quickstart Guide (English)

Introduction

1. Make sure all items listed in the
foam sheet for the speaker stand rubber feet, speaker stand mounting knob, power cable, and
microphone.
2. Read safety instruction booklet before using the product.
3. Study the connection diagram.
4. Make sure all input devices such as microphones, CD players, or digital media players are turned
off and volume settings are set at "zero."
5. Connect all devices as shown.
6. Switch everything on in the following order:
• audio input sources (i.e. microphones, instruments, CD players)
• Total PA Pro
7. When turning off, always reverse this operation:
• Total PA Pro
• any input devices

Box Contents

Total PA Pro
Microphone with Cable
Telescoping Speaker Stand
Remote Control
Power Cable (IEC)
Quickstart Guide
Safety Instructions & Warranty Information Booklet

Support

For the latest information about this product (system requirements, compatibility information, etc.)
and product registration, visit ionaudio.com.
Caution: Do not expose Total PA Pro to rain or stand in water.
2
Box Contents are included in the box. Look in the box under the