Preset Parameters - FAMC Mini User Manual

Preset Parameters

Below is a list of the Parameters associated with an individual Preset:
Parameter Name
Description
Resend Initial IA When turned ON, the Preset will process each of the 60 assigned IA-Slots of the Current IA-Map. The
Slots Preset will use the Initial States defined for the preset and then send either the ON or BYPASS
commands. If the global setting is not turned on (Block OFF messages), then all IA-Slots set to OFF will
process bypass messages.
Resend Globals When turned ON, this will tell the preset to resend all of the Global IA-Slots based on their current state.
If global override is turned ON, then the Global IA-Slots will be converted to the initial status first, and
then resent.
Global Override When turned ON, Global IA-Slots will be modified such that the new current state will match that
defined in the preset's Initial IA-States.
Resend When Turned ON, this will tell the preset to resend over MIDI whatever the current value of expression
Expression Pedal pedals are. This may be required for certain hardware that doesn't maintain volume or other effects
Values values from one preset to the next.
Reset "Non- Pages allow the use to set multiple functions per button. During your performance, you may change the
Preset" Button function order. If this parameter is turned ON, then when the preset is triggered, all page functions
Functions (other than functions assigned to Presets) will be reset to their page default (function #1) position.
Reset page Pages allow the use to set multiple functions per button. During your performance, you may change the
"Preset" button function order. If this parameter is turned ON, then when the preset is triggered, all page functions that
Functions contain a Preset holder, will be reset to their page default (function #1) position.
Allow Multi-Press Presets have two modes of triggering. A single press to trigger the preset and no further pressing
(process allowed, or whereby multi-press is turned ON. Multi-press allows a preset to either process STEP
steps/reset) commands (needing you to press the preset multiple times), or whereby you want to re-press a preset
to reset the LF+ to the presets defaults. This essentially allows you to press a preset button multiple
times and have the preset reset itself each time.
Process Preset By default, a preset will process song commands, then the preset commands, and then the IA-Slot
commands after commands. There may be times when you need the IA-Slots to trigger and process prior to the presets
IA's commands. Turning this parameter ON will allow this shift in command processing order.
Act as IA Switch When this command is ON, the Initial IA-States of the preset are ignored. Only the presets commands
35