Selecting Colors - FAMC Mini User Manual

SELECTING COLORS

The LF+ controllers allow flexibility with regard to button commands, and special function color coding. For instance, Presets
can be defined with an Active Preset color, and inactive. Those particular settings are found in the Global menu. Color
selection has a common interface and selection criteria.
There are seven colors available, and each color can either be set to BRIGHT or DIM. To control the light intensity of the DIM
setting, you will find that setting parameter in the Global menu. You will be able to increase or decrease the brightness to
match your desired level.
Below are your color choices as found in the Page menu whereby you can set the STATUS #1 LED should you choose to have a
color turned on when the page being edited is made active. Your color choices will be:
Status #1 Color
OFF
Status #1 Color
Yellow (Dim)
Status #1 Color
Purple (Dim)
Status #1 Color
OFF
Status #1 Color
Yellow (Bright)
Status #1 Color
Purple (Bright)
Colors can be set, (1) inside preset programming, (2) inside IA-Slot programming, (3) for Pages, (4) each and every special
command can have its own color defined. Groups have colors defined based on the group number (1-7).
Status #1 Color
GREEN (Dim)
Status #1 Color
Blue (Dim)
Status #1 Color
White (Dim)
Status #1 Color
GREEN (Bright)
Status #1 Color
Blue (Bright)
Status #1 Color
White (Bright)
Status #1 Color
RED (Dim)
Status #1 Color
Cyan (Dim)
Status #1 Color
RED (Bright)
Status #1 Color
Cyan (Bright)
33