Listening To Music Using Aux-In; Fm Radio; Do’s And Don’ts; Care And Maintenance - SoundLogic TSB-57014 Instruction Manual

Increase /
Decrease Volume
Pause
Play
Next Track
Previous Track
Tips!!
Short press the SOURCE Button each time to switch different functions of the speaker. The functions are
– FM / Bluetooth / AUX.

Listening to Music using AUX-In

1. Turn on the speaker.
2. Short press the SOURCE Button each time until the color of the LED indicator turns to Purple.
3. Plug the 3.5 mm Aux-in cable (included) into the AUX IN port of the speaker for AUX function. And,
the other end of the cable to the audio device (such as computer / tablet / MP3 Player etc.).
4. Select your favorite song at the source device.

FM Radio

1. Turn on the speaker.
2. Short press the SOURCE Button each time until the color of the LED indicator turns to Green.
3. Press the TUNE + Button to search and play the searched available FM station. Or press and hold the
TUNE + Button until the LED indicator starts blinking to search and play the searched available FM
station with Green LED indicator stays on.
Note: The FM Antenna on the rear of the unit is for radio reception. If reception is weak, unwind and
extend the wire or relocate the wire to improve the radio reception.
Do's and Don'ts
•
Do not play music at excessive levels as damage to hearing and/or equipment may result.
• Do not use outdoors in wet or in damp surroundings.

Care and maintenance

Clean the unit with a soft, dry cloth. Never use chemicals or hard abrasives.
Playing music Press the VOL + or VOL – Button to increase or decrease the
volume.
or
Adjust volume from the source device.
Playing music Press
Pause Press
Playing music Short press the
Playing music Short press the
once to pause the music
once resume the music
button to the next track
button to the previous track
6