Advertisement
Press any key to wake up the mouse before "ID pairing" is performed.
>>Locate the power switch (Normally you can find it on the mouse bottom side).
>> Make sure the power switch is in OFF position and then switch it to ON position within 30 seconds. (If power switch is
in ON position, switch it to OFF and back to ON position within 30 seconds).
>> After above procedure is completed, the mouse will start to perform pairing procedure with the receiver; wait for
seconds, the next screen will pop up as shown after ID pairing is completed.
.After ID pairing is completed, move the mouse and reply YES if mouse moves fine, then click NEXT. In case the ID
pairing fails, click "BACK" to repeat steps 2, 3 and perform the ID pairing procedure again.
. After above ID pairing is completed, you can follow the below steps:
1．Click "OK" to complete the ID pairing.
2．If you need to perform another ID pairing for the new devices, click "New Mice/KBs ID Pairing" again and repeat above
steps 2, 3, 4 to perform another ID pairing.
After you have finished adding all the new mice and keyboards, click "Into G-Family Management" to manage the multiple
mice and keyboards.
Tailor-made the Mouse with "Macro Manager" for Each Button According to Your Needs
13
Multi-link
Management Program
Advertisement
