Download Print this page

A4Tech R4 Manual page 12

X7 oscar wireless gaming mouse

Advertisement

Check Battery power:
Click "Check Power" in "power-saving management" to check the battery power status.
Low Battery Inform:
When the mouse power is low, Low Battery Inform page will pop up at the right corner of your screen to remind you to
replace the batteries in time.
Note:
Light color mouse pads can save more power than deep color ones. 500Hz full speed in the gaming mode will consume
much more power. Rechargeable batteries are recommended for intensive mouse users, and always turn-off the mouse
power when long time not use.
Wireless Working Range Setting
You may setup wireless working ranging within 15~20 meters; the farther range needs to consume more power, and
remember to resume to shorter range after the meeting.
In the circumstances that there is wireless conflict nearby or the meeting room is the huge one, adopting a USB extension
cable for the receiver will improve and secure better communication quality.
Best Wireless Signal Monitoring
Click on the icon at your system tray and select "Best Wireless Signal Monitoring" to indicate RF signal and help to find the optimal locationl to avoid RF
interference.
Search and Keep away from Wireless Conflicts:
If wireless mouse is not working smoothly due to wireless conflicts, use wireless signal monitoring to monitor and improve
the signal level and get best improvements.
Detect Receiving Signal Level:
Moving the mouse, the indicator will display current signal level. The less level value means the better receiving signal,
value under 120 means the devices are working in good condition. The value may increase when working in a long range
venue, or there is strong interference. Try different allocation of mouse and receiver till the best improvement is secured.
Suggest Improvements:
1. Use a USB extension cable for the receiver and keep it away from the computer or any interfering sources. It is highly
recommended to use it for the long range meeting venue or when there is strong wireless conflict nearby.
2. Plug receiver on the same side with the mouse, it may avoid potential wireless conflicts from the notebook computer.
11

Advertisement

loading