Table of Contents
Advertisement
• Function 6: X-Y Mode
In this mode, the right sensor behaves like the left. Each sensor sends MIDI values from 0
– 127 to a different Control Change number. Select left and right CC#'s with the KEY and
SCALE knobs. Set the right sensor MIDI max and min with the OCTAvE knobs.
DATA
DATA
FAR
NEAR
Left Sensor MIDI Max
and Min
Since this mode does not trigger notes, use it with a drone synth or a sequencer. The Altura
defaults to CC#'s 85 & 86 on startup, which are undefined. Consult the CC# chart of your
synthesizer to select suitable controller numbers. This function is not recommended for use
with the Macchiato Mini Synth.
Here's what the display is telling you:
When just one sensor is active, this is the MIDI number being transmitted.
0 - 127
Both sensors idle
---
Both sensors transmitting.
z-x
• Function 7: Send Channel Select
The Altura defaults to MIDI Send Channel 1. Use DATA FAR knob to change the send
channel.
FUNCTION
KEY
Function
Left CC#
Select
Select
6
OCTAVE
SCALE
NEAR
Right CC#
Right Sensor MIDI Max
Select
and Min
OCTAVE
FAR
Advertisement
Table of Contents
