Prepare For A Finger Stick; Prepare The Test Strip; Insert The Test Strip - URIT 12 Operation Manual

the screen. The meter will automatically
turn OFF.
3) Remove the code card. Turn the meter
ON again. Please verify the displayed code
is match the code printed in the label of
container which the test strips will be taken
from.

3. Prepare for a Finger stick

Make sure the patient's hand is warm
and relaxed. Massage the patient's middle
or ring finger from the knuckle up to the tip
to stimulate blood flow. Clean the sample
area with alcohol and wipe dry with a sterile
gauze pad.

4. Prepare the Test Strip

Take a test strip from its container. Ex-
amine the test strip. Do not use if there are
tears, wrinkles or debris. Do not touch the
test spot membrane. Reseal remaining test
strips in the original container.

5. Insert the Test Strip

Insert the test strip into the strip holder