Entering Current Time And Date - URIT 12 Operation Manual

Step 3: Pressing the SET key as step 1 and
2 to enter the current time and date. If ente-
ring the current time and date is not requir-
ed, and then turn the meter off to confirm
the selected time and date format.
Note: Once confirmed, the time and
date format will be changed for all stored
test results.

4. Entering Current Time and Date:

The user must enter the current time
and date for correct stamping of test results.
If proceeding from Select Time and Date
Format instructions above, go directly to
Step 2. Otherwise, start from Step 1.
Step 1: Press and hold the SET key until
the time and date flash. Press the SET key
again.
Step 2: The hour (with AM/PM if 12 hr form-
at selected) will flash. Press the ▲ or ▼
key to enter the hour. Press the SET key to
confirm.