Pantech PG-C300 User Manual page 51

In this mode, the photo can be taken with the
Frame Capture saved frame.
Image size: 128X128 size (fixed)
You can take several photos and save them in
Pattern Capture
a single screen.
3. Press the [ OK] key or [Extra] Key to take the picture in the current
preview.
Press the Side [Up / Down] key to zoom in/out of the image in proportion
to the original ratio. Use the Navigation key to scroll and view the image
enlarged.
Press [C] key to return to the camera preview screen.
In Multi Capture mode, select [Mark]/[Unmark] to check the image box
on the captured images to save them.
4. Select the [ ] key to display the Save Option screen, where you can
select a photo album and edit the photo name under which it should be
saved.
In Multi Capture mode, the photo will be given a name automatically.
However, you can manually input the name if only one image is selected.
Definition of Camera Function Control Soft Key during Flip Open
Function Available Menu
Image Size LCD/QVGA/VGA/XGA/SXGA
Brightness 7 levels (from 0 to 6)
Zoom
Flash
Hide Icons
Camera key
4.3.1.2 Using the Camera Options
Press the [Option] Soft key [
following information which will be applied to the image.
Album: Moves to the Photo Album.
Goto
Image
LCD(128X128), VGA(640X480).
Timer: Selects the delay time for all modes. When you press
Self
the [
after the preset time. When the camera mode is off, the time value
will return to the setup value.
Multi-Shot: Controls the number of continuous shooting.
Flash: On/Off.
Soft Key
Effect:
[ ]
Normal/Sepia/Solarization/Monochrome/Line
Drawing/Negative/Embossing
[ ]/[ ]
Control by levels
On/Off
On/Off
Main LCD/ Main + Sub LCD.
] in Capture mode to select the
Size: Displays the size of image that you want to shoot
] key or [volume up] Key, the camera will take a picture
Applies an effect
[volume
up]/[volume
down]
[ ]
[ ]
[ Naviga
tion down key]
to the Camera.
51