Advertisement
Introduction
TuneStage provides a stylish, easy way to play your iPod tunes through your home
stereo—without wires. Setup takes only minutes and requires no software or custom
configuration. Just plug it in and enjoy your music.
TuneStage from Belkin delivers the pristine, CD-quality sound that iPod users demand.
Featuring advanced Bluetooth .0 technology for enhanced audio quality, the TuneStage
provides improved rejection of interference, and lower power consumption compared to the
Bluetooth . standard. TuneStage transmits wirelessly from up to 0m away from your stereo,
even through walls. Please review this User Manual carefully so that you can be sure to get the
most from your TuneStage .
The TuneStage works with any iPod that has a
dock connector on the bottom
Package Includes
TuneStage Bluetooth™ Transmitter
TuneStage Bluetooth Receiver
V/.0A AC Power Adapter
Introduction | 0
iPod with video 30GB
.8m Dual RCA-to-3.5mm Stereo Cable
0.9m USB A-to-Mini-B Cable
Setup Instructions
STEP 1: TuneStage 2 Receiver Setup
1. Power off your stereo system.
2. Plug the TuneStage Receiver into one of your home-stereo, audio-source inputs using the
supplied audio cable, usually the "aux" input is a good choice. Do not connect TuneStage
to your receiver's "phono" input.
3. Plug the included power adapter into the TuneStage Receiver and then plug the other end
into an AC outlet.
4. Press in the power button located at the back of the TuneStage Receiver.
5. Power on your home stereo and select the audio-source input to which the TuneStage
Receiver is connected.
RCA or 3.5mm Mini-Jack Stereo Connections
DC-Power-Adapter Connection
Setup Instructions | 0
Advertisement
