Related Manuals for Belkin TuneStage 2
Summary of Contents for Belkin TuneStage 2
-
Page 1: User Manual
User Manual TuneStage 2 for iPod ® ® Introduction... - Page 2 2. Plug the TuneStage Receiver into one of your home-stereo, audio-source inputs using the supplied audio cable, usually the “aux” input is a good choice. Do not connect TuneStage TuneStage from Belkin delivers the pristine, CD-quality sound that iPod users demand. to your receiver’s “phono” input.
- Page 3 Setup Instructions Operating Instructions Wall-Mounting the TuneStage 2 Receiver (Optional) STEP 2: TuneStage 2 Transmitter Setup 1. Make sure the antenna is pointed upward. 1. For best results, the Transmitter should be close to the Receiver when first making the 2.
-
Page 4: Operating Instructions
Operating Instructions Understanding the LEDs STEP 3: TuneStage 2 Setup for Use with Headphones Enabled with Bluetooth Technology (Optional) NOTE: TuneStage will only pair with stereo headphones enabled with Bluetooth technology that have a pairing code of 0000. Consult your headphones’ manual for the pairing code. -
Page 5: Troubleshooting
Transmitter are not within this range to ensure the best sound quality. Another device is pairing with the TuneStage 2, and the music from the iPod cannot be heard. • Turn off the other Receiver or Transmitter that is in the area of the TuneStage . -
Page 6: Specifications
RF Output: +.0 dBm AC Power: 3.3V @ 0mA All above warranties are null and void if the Belkin product is not provided to Belkin International for inspection upon Sensitivity: <0.% BER at -8 dBm Run time of Transmitter on a fully charged Belkin’s request at the sole expense of the purchaser, or if Belkin International determines that the Belkin product has... - Page 7 FCC Statement to Belkin International for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to that it is impractical to ship the damaged equipment to Belkin International, Belkin may designate, in its sole part 5 of the FCC Rules.
- Page 8 +3 (0) 0 65 300 +3 (0) 0 65 39 fax © 00 Belkin International. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth SIG, Inc., and are used by Belkin International under license.
- Page 9 In addition to the requirements of Section 7.1.5 in RSS-Gen, the device's shall also contain the following or equivalent statement: “Privacy of communications may not be ensured when using this telephone”. If privacy is provided as a standard feature, the privacy notice may be omitted provided that full justification accompanies the equipment certification application for evaluation by Industry Canada.
- Page 10 FCC statement in User's Manual (for class B) "Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 11 The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2.FCC RF Radiation Exposure Statement: The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.