Vcr Setup - LG M237WD Owner's Manual

EXTERNAL EQUIPMENT SETUP

VCR SETUP

To avoid picture noise (interference), leave an adequate distance between the VCR and set.
■
Typically a still picture is shown on the VCR. If a user uses 4:3 picture format for a long time, an afterimage
■
may remain on the sides of the screen.
When connecting with an antenna
ANTENNA/
CABLE IN
Connect the RF out socket of the VCR to the aerial socket of the set.
1
2 Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using the 'Manual
3
programme tuning' section.
4
Select the programme number where the VCR channel is stored.
Press the PLAY button on the VCR.
5
ANT OUT S-VIDEO VIDEO
1
OUTPUT
ANT IN
SWITCH
Wall Jack
2
Antenna
L R
13