ABB REM615 ANSI Product Manual page 19

Table 19. Electromagnetic compatibility tests (continued)
Table 20. Insulation tests
Table 21. Mechanical tests
Table 22. EMC Compliance
Description
EMC directive
Standard
ABB
Motor Protection
REM615 ANSI
Product Version 2.0
Th e EMC immunity test level meets the requirements listed below:
Description
Electromagnetic emission tests:
• Conducted, RF emission (mains terminal)
0.15...0.50 MHz
0.5...30 MHz
• Radiated RF emission
0...230 MHz
230...1000 MHz
Description
Dielectric tests:
• Test voltage
Impulse voltage test:
• Test voltage
Insulation resistance measurements
• Isolation resistance
Protective bonding resistance
• Resistance
Description
Vibration tests (sinusoidal)
Shock and bump test
1MAC251744 -PG Rev. A
Value
According to the EN 55011,
class A and IEC60255-25
< 79 dB(μV) quasi peak
< 66 dB(μV) average
< 73 dB(μV) quasi peak
< 60 dB(μV) average
< 40 dB(μV/m) quasi peak,
measured at 10 m distance
< 47 dB(μV/m) quasi peak,
measured at 10 m distance
Value
According to IEC 60255-5
2 kV, 50 Hz, 1 min
500 V, 50 Hz, 1min,
communication
According to IEC 60255-5
5 kV, unipolar impulses, waveform
1.2/50 μs, source energy 0.5 J
1 kV, unipolar impulses, waveform
1.2/50 μs, source energy 0.5 J, com-
munication
According to IEC 60255-5
>100 MΩ, 500 V DC
According to IEC 60255-27
<0.1 Ω (60 s)
Value
According to IEC 60255-21-1,
class 2
According to IEC 60255-21-2,
class 2
Reference
2004/108/EC
EN 50263 (2000)
EN 60255-26 (2007)
Issued: 03.01.2010
19