Advertisement
Installation Instructions JACKOBOARD
7) Press the former board into the upper compartment of
the shelf unit. This serves to keep the shelf unit at right
angles and is removed once the adhesive has hardened.
Notes
BOARD-FIX
adhesive guarantees the permanent bon-
®
ding of the shelf unit components and is therefore a cruci-
al element of the assembly. The purpose of the screws is
to facilitate assembly.
Please note
The information in this leaflet is based on our experience and current materials specification. It represents no specific guarantee and the instruc-
tions for use outlined should be always observed together with considerations regarding building structure and existing Building Law.
JACKON Insulation GmbH | Carl-Benz-Straße 8 | D-33803 Steinhagen
Telephone +49 5204 9955-320 | Telefax +49 5204 9955-300 | info@jackodur.com | www.jackon-insulation.com
Modula R 600
®
8) The shelf unit is now complete. Once the adhesive has
cured (approx. 24 hours) it can be directly covered with
tiles or plaster. To ensure permanency, the shelf unit must
be bonded to the base (wall and floor) using BOARD-FIX
adhesive. Please observe the following notices.
BOARD-FIX
adhesive is usable for about 10 minutes af-
®
ter application. We therefore recommend that you adhere
to the sequence in these instructions when assembling
the washstand.
EN
EN international
®
Advertisement
