Advertisement
1) Apply adhesive to both joining parts (side wall and shelf).
3) The shelves are glued on one after the other. The 80 mm
shelf is positioned second from the bottom to match the
washstand.
5) Position the second side wall so that each tongue fits
into the grooves. Make sure the side wall and shelves are
flush.
Installation Instructions JACKOBOARD
2) Insert the shelf into the groove on the side wall. Make
sure the shelf and side wall are flush.
4) Apply adhesive to both joining parts (side wall and
shelves).
6) Screw both side walls of the unit tight by positioning
the enclosed screws and washers in the pre-drilled holes.
Using a manual screwdriver, tighten the screws until the
heads are flush with the surface.
Modula R 600
®
03
Advertisement
